How To Choose Tires - Technical Info
Choosing tires is not a simple matter. Keep in mind that tires are the only connection between the vehicle and the road, and this contact area is the size of a human palm. When selecting tires, use the data given in the technical data sheet and the size of the discs on which the tires will be fitted.
Marking and properties of tires
The tire width is given in millimeters, measured between the side walls.
Side profile, it is a percentage of height to width
The rim (wheel) diameter is given in inches.
The load index, or also the mass index, indicates the maximum load a tire can carry.
The speed index indicates the maximum speed at which the tire is built.
Marking DOT
All tires are stamped on the side wall so-called DOT code, which indicates the manufacturer's code, size code and production date. It is given in the form of up to 12 characters. It contains four digits, where the first two numbers represent the week and the last two years the production.
The significance of tires demands no introduction. However, it is perhaps not always possible to have the best caliber cheap tyres Melbourne in the market, simply because they will burn a hole into your pocket. That doesn't follow that hazard the safety of our nearest and dearest and we want to own services and products.
Homologation
Approval is a certificate that a product meets safety or technical standards for use. How are homologated tires and wheels marked? What is a good data sheet for?
Run-flat tires
Car tires have a special construction (reinforced side wall) that allows you to run punctured.
Types of designs
Wider vs. narrower tire
You also have larger (wider) alternative tire sizes registered in TP and you do not know what to choose. Aside from the fact that wider tires on a car usually look better, here are some functional differences.
Low profile tires
Elegant and sporty design with exceptional sporting features.
Ultra-High-Performance tires
High performance tires excel with maximum grip, excellent handling and high resistance to heat even at extreme speeds.
Learn more about tires
Tire storage
Do not underestimate tire storage, as this can significantly increase tire life. The aging of tires during storage is influenced by several factors, in particular: humidity, light and temperature.
Pressure in tires
The right pressure is important both in terms of tire life and consumption and safety. Check the tire pressure when the tires are cold, not immediately after driving. Refer to the vehicle manual for recommended tire pressures.
Mandatory tire pressure control - TPMS
TPMS stands for Tire Pressure Monitoring System. Warns the driver of poorly inflated tires or tires. for tire defect. Since when is it mandatory, what does it mean for tire replacement and selection?
Tread depth
The statutory minimum tread depth is set at 1.6 mm for summer tires and 4 mm for winter tires.
Obligation of winter tires
In winter, we have much more surprises on the roads than in the summer months, not only in the form of snow or ice. On such a surface, the tire tends to have less grip than on dry roads, and that is why winter tires are produced.
Tire damage
An overview of the most common tire defects and advice on how to avoid them. Most of the damage is not due to a manufacturing defect, but due to misuse of tires or poor technical condition of the vehicle.
Sunshine Tyres Shop
Address: 45 Market Road, Sunshine VIC 3020
Email: info@sunshinetyreshop.com.au
Call: 03 8528 3302