Tips For Choosing Quality Earphones

Earphones usually have two types, namely In-Ear Monitor (IEM) and Earbuds. IEM is an earphone that is usually made from rubber material that is more comfortable to use. The rubber on the IEM goes into the ear hole, so that when the user is listening to music there is absolutely no sound from outside. The sound quality will be clearer. Whereas Earbuds are made of hard, round plastic. Its use is only taped to the ear hole. There is still noise from outside that can enter through the gap because it's not too tight.

Some people often feel confused when they want to buy earphones. Earphones purchased should be of high quality, comfortable to use when mounted on the ear, and produce crystal clear sound. Here's how to choose quality earphones.

The optimal/optimally thing about Earbuds is they are extremely easy to carry as a result of their size. All these ear buds are the number 1 selection for persons who use cans on the go. The in-ear variants of those ear buds will also be good since they give isolation from the surface noise to you if you are traveling at a bus or onto an airplane. All these earbuds may also be the number one selection because around-the-ear headphones are not simple to use because of these for people who wear glasses.

The Need For Types Of Music

Before buying earphones, you should consider the needs that you need. Needs are determined by the music to be heard. See what type of music you like and listen to most often. Each type of music has its own characteristics. For example, hip hop and metal music are compatible with warm-  type earphones  which have bass-tended sound output because the vocal sounds will be slower than bass. While the flow of rock and classical music is more suitable with bright  type earphones  that emit treble sounds.

After determining the type of music needs, now choose the earphone shape that suits your taste. Choose the shape of the earphone that makes you feel comfortable when using it in the ear hole. Choose IEM-type earphones that cover all ear holes or Earbuds that just stick in the ear hole, but don't enter.

Pay Attention To Earphone Specifications

In addition to the needs of the type of music and its shape, you must also pay attention to the specifications contained in the earphones. Some specifications that need to be considered include frequency,  impedance, and sensitivity. Pay attention to the earphone's ability to respond to sound wave frequencies. Earphones that have a large frequency range are said to be of good quality. The wider range means the quality is getting better. The lower the lower frequency and the higher the upper frequency means the better too. This means the earphones will be able to play sounds that have low frequencies that might not normally be heard. For example, the frequency is 4 Hz - 30,000 Hz. 4 Hz is the bass sound, while 30,000 Hz is the treble sound. The higher the tip frequency, the more complete the audio quality.

In addition to frequency, there are  impedances  or obstacles that must also be considered. Usually earphones have a resistance of about 32 ohms. Low impedance  ranges from 15 ohms to 150 ohms. While the high resistance has a size of more than 150 ohms. Barriers indicate the resistance that is inside the earphone. High and low barriers do not determine quality, so we can adjust according to taste.

While sensitivity is indicated by the writing SPL ( Sound Pressure Level ) in units of milli watts (mW) or decibels, for example 114 dB / mW. Through sensitivity, you can find out how big the sound that can be issued by the earphone. The bigger the number, the louder the sound will be issued, so you do not need to increase the volume of the player. In addition, the higher the number, the less power is needed. To be safe so as not to damage your hearing, look for earphones that have a sensitivity of <85dB. In addition, pay attention to the cable on the earphone. Earphones with quality sound usually use double-side on the cord.

Pay Attention To The  Budget  You Have

This is the most important thing. After weighing the types, shapes, and specifications, adjust your  budget or finances. Usually, the higher the quality of the earphones, the more expensive the price. Do not be tempted by non-original goods or KW because it certainly will not last long.

After buying quality earphones to suit your taste, don't forget to  burn-in  to make it work optimally. Burn-in  is the stage of the process to maximize driver capability. Rubber on earphones will become more flexible. Sound composition to be produced is also more optimal. Burn-in  can be done by playing songs for more than 20 hours with the volume not too high. During the process, the sound quality will change. If there is no change in sound quality, the burn-in  process is  considered complete.